Everbuild Industrial Superglue has a medium viscosity formula it fills gaps to 0.1 mm. For use on perfect fit surfaces where fast set is required. Bonds non-porous surfaces eg most plastics, metals, glass, PVC, rubber and EPDM. Viscosity at 25C - 100cps. Set time 5 to 15 seconds.
Limitations: Ensure surfaces are degreased prior to bonding. Ensure surfaces are close fitting. This adhesive will not bridge gaps. Do not use on glass. Do not use in applications involving constant water immersion. Do not use on bitumen or tar leaching products. As the manufacturer cannot know all the uses its products may be put to, contact technical services for advice if in any doubt.
Application: The surfaces to be glued should be clean, dry and free from dust, grease and other contaminants. Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extended setting times. Where possible, ensure working environment has a relative humidity of 50% +. Apply adhesive to one surface only. Press surfaces together and hold for 10 seconds or as indicated below. Cure speed is rapid so exercise care when aligning. Store in cool, dry conditions between +5 and +25C. Ensure good ventilation. Storage outside these parameters will dramatically reduce shelf life.